| |
|
We supply all plastic material in regrind form, if required materials can be supplied tested and backed with a certificate of analysis.
»Pet Flakes:
Recycled PET flakes can be used for manufacturing a wide range of products. Depending on the purity the flakes can be reused for different types of application i.e. food packaging products, industrial & other packaging uses.
»PET Monofilament:
PET Monofilament is used in very high strength fabric for filtration application, tarpaulin, roofings etc. Monofilament for zippers is one of the medium value product.
»PET Sheet:
Polyester films & sheet have very high strength clarity and keeping strength or self life. They also have excellent barrier property and inertness to use them in food applications.
»PET Strappings:
PET strap is recognized as a new environment protective strapping material to substitute steel strap & PP Strap. PET strap are widely used in steel industry, chemical fiber industrial, paper plants, glass industrial, tobacco, electronics etc.
»PET Fibre:
It is used in textile industry to manufacture products like carpets, tents, luggage & also in filler in the mattress & pillows.
Further we buy & sell all types of plastic in all forms, be it plastic production scrap, post consumer or post industrial waste, regrind. If you are looking to buy or sell any plastics then please contact us for competitive pricing and payment terms.
Click on the material of interest below for more information. The material property ranges shown, represent the range of properties across our current customers. However If you require material outside a range shown, contact us for advice, as we may well be able to produce to your specification too.
Injection Moulding Grade Products Talc filled polypropylene compound with medium to high flow, formulated for ease of moulding and an excellent balance between stiffness and impact performance. Current options for Material Properties: Melt Flow Index 3 - 26 grms/600secs This compound can also be produced with the addition of a UV as a heat stabiliser for use in exterior applications or where heat is an issue.
Current options for Material Properties: Melt Flow Index 5 - 50 grms/600secs Rotograde Medium Density Polyethylene which is also suitable for injection moulding. The MFI is suitable for thin-wall and moderately intricate parts so is highly processable. Resilience, resistance to UV and strength are all good. Current options for Material Properties: Melt Flow Index 2.5-8.5 grms/600secs High Density Polyethylene formulated for ease of processing, suitable for bottle caps, produce trays and long flow length applications where flexibility is required. Current options for Material Properties: Melt Flow Index 2 - 15 grms/600secs High Impact Polystyrene formulated for a consistent combination of impact strength and rigidity. The material also gives a consistent and attractive surface finish making it suitable for visible durable consumer parts. It is also particularly suitable for sheet production destined for vacuum forming with its combination of rigidity, impact and fast processing. Current options for Material Properties: Melt Flow Index 3 - 9 grms/600secs General-purpose polystyrene (GP polystyrene or crystal polystyrene, CPS) formulated for a range of extrusion applications where it gives good strength, rigidity and heat distortion characteristics. It is also suitable for injection moulding applications either alone or blended with High Impact Polystyrene (HIPS). Current options for Material Properties: Melt Flow Index 1.6 -20 grms/600secs Acrylonitrile Butadiene Styrene is a high impact compound formulated for a consistent combination of impact strength and rigidity allied to ease of processing by injection moulding techniques. Current options for Material Properties: Melt Flow Index 6 - 22 grms/600secs
Current options for Material Properties: Melt Flow Index 2 - 45 grms/600secs PolyPropylene Homopolymer with comparatively high toughness allied to stiffness and rigidity. There is also a talc loaded variant for increased stiffness. It has excellent gloss and is suitable for relatively thin-wall applications as well as thicker items. Current options for Material Properties: Melt Flow Index 3.5 -15 grms/600secs Recycled Injection grade Polycarbonate and Polycarbonate / ABS blends with a variety of property profiles. Current options for Material Properties: Melt Flow Index 8 - 15grms/300secs Extrusion Grade Products Linear Low Density PolyEthylene suitable for a wide range of film and sheet extrusion applications. Current options for Material Properties: Melt Flow Index 0.6-0.8 grms/600secs Low Density PolyEthylene formulated for toughness and strength in sheet and other extension applications. This material also has good crack and chemical resistance. Current options for Material Properties: Melt Flow Index 0.2 - 1.5 grms/600secs Medium Density PolyEthylene formulated for use in extruded tube and profile applications. It has excellent strength and resilience. It is also highly processable and suitable for welded applications. Resistance to both UV and stress cracking is good. Current options for Material Properties: Melt Flow Index 0.1-0.8 grms/600secs High Density PolyEthylene formulated from post-consumer bottles or from industrial extruded pipe or sheet grade products, or a mixture of the two depending on the percentage of post-consumer waste required by the customer. Some post-consumer waste bottles are selected with no pigment and are therefore suitable for a wide range of over-colouring (only bright whites and yellows are difficult). Current options for Material Properties: Melt Flow Index 0.15-2grms/600secs Recycled general purpose polystyrene (GP Polystyrene or Crystal Polystyrene, CPS) formulated for a range of extrusion applications, such as sheet, profile (foamed or non-foamed) where it gives good strength, rigidity and heat distortion characteristics. Current options for Material Properties: Melt Flow Index 1.6 -20 grms/600secs High Impact Polystyrene formulated for a consistent combination of impact strength and rigidity. The material also gives a consistent and attractive surface finish making it suitable for visible durable consumer parts. It is also particularly suitable for sheet production destined for vacuum forming with its combination of rigidity, impact and fast processing. Current options for Material Properties: Melt Flow Index 3 - 9 grms/600secs Recycled extrusion grade PolyPropylene Copolymer formulated for a high degree of toughness and strength allied to an ease of processing by extrusion. The impact properties are also well preserved at low temperatures making it suitable for use in applications involving freezer temperatures. Current options for Material Properties: Melt Flow Index 1.5-2.5 grms/600secs Rotograde Products Medium Density PolyEthylene formulated for use in roto-moulding applications. The MFI is suitable for thin-wall applications and moderately intricate parts so is easy to process. Resilience, resistance to UV and strength are all good. Current options for Material Properties: Melt Flow Index 2.5-8.5 grms/600secs BlowMoulding Grade Products HDPE Recycled high molecular, High Density PolyEthylene particularly suitable for blow moulding applications (up to 350 litres) having excellent parison stability performance. This can be produced with a percentage of post-consumer feedstock dependent on customer requirements. Current options for Material Properties: Melt Flow Index 0.10-2grms/600secs |
 |
|||||||||||||||||||||||||||||||||
We
trade & market several PET products like - PET Flakes, PET Chips,
PET Sheet, PET Strapping, PET Monofilament and PET Fibre.
We
have access to a wide variety of packaging scrap from recycling
facilities and retail outlets. All scrap is bales to maximise the
weight shipped and thus reduce onward tarnsportation costs.
Talc
filled PP
Low
Density Polyethylene formulated for toughness and process ease in
injection moulding applications. The material also has good stress
crack and chemical resistance. 
PolyPropylene
Copolymer formulated for a high degree of toughness and strength
allied to ease of processing by injection moulding. The impact properties
are well preserved at low temperatures making the material suitable
for use in applications involving freezer temperatures. The material
can also be produced with a high MFI for fast-cycling injection
moulding of thin-wall applications.